How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Bernard S. Your Own Question
Bernard S.
Bernard S., HD TV, Large Appliance Sales
Category: Appliance
Satisfied Customers: 1220
Experience:  27 Years Managing Stores, Operations and Selling Appliances
8697087
Type Your Appliance Question Here...
Bernard S. is online now
A new question is answered every 9 seconds

How to replace control panel on GE Profile ...

This answer was rated:

How to replace control panel on GE Profile washing machine WPRB8050Docc part #(NNN) NNN-NNNN

HiCustomer

Thank you for using Just Answer.

This diagram should help.

If you already have this and/or you need more information let me know.

bernie

Bernard S. and 2 other Appliance Specialists are ready to help you
Customer: replied 8 years ago.
Reply to Bernard S.'s Post: Thanks that's a start! Is there any instructions for the actual wires that will be attached to the assembly? Is there a better step by step set of instructions. Thanks

HiCustomer

I don't have that service manual with me. However, this evening when I get back home, I may have it with the step by step. A lot of the GE's use a torx type screw driver. For wiring either take a digital picture of the connections and/or label them and/or remove one and replace the same one on the new unit. Follow any and all instructions that came with the control part. Especially any that specifically apply to your model.

bernie