How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Chuck G. Your Own Question
Chuck G.
Chuck G., Home Appliance Technician
Category: Appliance
Satisfied Customers: 343
Experience:  30 Yrs. Experience in the appliance repair field
8049636
Type Your Appliance Question Here...
Chuck G. is online now
A new question is answered every 9 seconds

I have a Dometic Model RM2652. The control board ...

Customer Question

I have a Dometic Model RM2652. The control board appears to have been fried. I obtained a replacement but it appears that some wiring changes must be made to install the new board. No diagram was furnished with the replacement. Can you assit me?
Submitted: 8 years ago.
Category: Appliance
Expert:  Chuck G. replied 8 years ago.
Hi, Thank you for using justanswer for your appliance questions!



I can most likely figure this out for you. Can you take a couple of digital photos of the old control, the new control and the wiring? Just post them here, and i will advise you! / chuck
Customer: replied 8 years ago.
Reply to Chuck G.'s Post: My digital camera software is out of order at the moment. I am looking for Dometic's factory diagram for the replacement of this control board.