How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Bryan Your Own Question
Bryan, Home Appliance Technician
Category: Appliance
Satisfied Customers: 12156
Experience:  15 yrs. experience as a certified appliance technician.
Type Your Appliance Question Here...
Bryan is online now
A new question is answered every 9 seconds

I have a first generation neptune frontload washer.

Resolved Question:

No Comment Added
Submitted: 8 years ago.
Category: Appliance
Expert:  Bryan replied 8 years ago.
how can i help ? Bryan
Customer: replied 8 years ago.
I have a first generation neptune frontload washer it sounds like a airplane taking off in the spin ccycle with come water leakage I believe.
Expert:  Bryan replied 8 years ago.
it sounds like spin bearing is bad, water leakage is probably seal in back. changing bearing in this machine is extremely hard , it a alot of work and I'm not sure this may come as whole tub asm. it could be pressed in on yours that means you have to change whole tub. not recomended (alot of money) machine is not very good they have alot of problems. hope this helps press accept if it did. thanks Bryan
Bryan and 2 other Appliance Specialists are ready to help you

Related Appliance Questions