How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Bryan Your Own Question
Bryan, Home Appliance Technician
Category: Appliance
Satisfied Customers: 12156
Experience:  15 yrs. experience as a certified appliance technician.
Type Your Appliance Question Here...
Bryan is online now
A new question is answered every 9 seconds

I have a MAYTAG Dishwasher Model WU404 - it starts into the ...

This answer was rated:

I have a MAYTAG Dishwasher Model WU404 - it starts into the rinse cycle and hot water keeps flowing into machine and flows out onto the floor - ''timer'' - ''what''?
hi this is Bryan, its sounds like either your float switch is stuck or your fill valve is bad. the valve is electronic , when you open door does it stop filling? if so its probably your float. you may have something holding your float from lifting up and shutting water off.check that. thanks hope this helps Bryan
Bryan and 4 other Appliance Specialists are ready to help you

Related Appliance Questions