How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask DennisH Your Own Question
DennisH, Appliance Technician
Category: Appliance
Satisfied Customers: 198
Experience:  14 years with current appliance repair company
Type Your Appliance Question Here...
DennisH is online now
A new question is answered every 9 seconds

How to install agitator clip in kenmore washing maching.

This answer was rated:

No Comment Added

Is this the clip You are refering too?


If yes then it is sliped down the agitator shaft under the agitator, the white plastic drive that goes under it with offset plastic tabs goes on first with one tab going into the top of the drive block you should see the hole where it goes, then the open side of the clip goes opposite of the tab that points up.

Hope this helps


DennisH and 2 other Appliance Specialists are ready to help you