How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Bryan Your Own Question
Bryan
Bryan, Home Appliance Technician
Category: Appliance
Satisfied Customers: 12156
Experience:  15 yrs. experience as a certified appliance technician.
10522817
Type Your Appliance Question Here...
Bryan is online now
A new question is answered every 9 seconds

whirlpool senseon dryer have replaced thermostat and ...

Resolved Question:

whirlpool senseon dryer have replaced thermostat and sensor and still will not heat all the time
Submitted: 8 years ago.
Category: Appliance
Expert:  Bryan replied 8 years ago.
which thermostat did you replace? and what sensor ? do you have model # ? I will see what I can find out. thanks Bryan
Customer: replied 8 years ago.
Reply to a1speedyappliance's Post: model # XXXXX   only has i sensor and i thermostat
Expert:  Bryan replied 8 years ago.
okay let me check. thanks Bryan
Customer: replied 8 years ago.
ok will wait
Expert:  Bryan replied 8 years ago.
this is a gas dryer, does it light for only a few minutes then go off. is there a little plastic square piece about 1"x1" on front you can pop off and see flame ? you may need gas coils on valve. or you could have a blocked vent check and make sure your venting real good. thanks Bryan
Bryan and 3 other Appliance Specialists are ready to help you