How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Bryan Your Own Question
Bryan, Home Appliance Technician
Category: Appliance
Satisfied Customers: 12156
Experience:  15 yrs. experience as a certified appliance technician.
Type Your Appliance Question Here...
Bryan is online now
A new question is answered every 9 seconds

My Kenmore dishwasher Delay Light is flashing rapidly ...

Resolved Question:

My Kenmore dishwasher Delay Light is flashing rapidly (Dishwasher newly installed ran only one cycle). Cycling power off/on does not clear this fault. - What does this fault code mean and how do I clear it
Submitted: 8 years ago.
Category: Appliance
Expert:  Bryan replied 8 years ago.
these machines are having alot of trouble with the boards , try shutting breaker off and wait a few minutes then turn it back on. see if it resets. if not or if it happens again if its new call for service it should be under warrenty. thanks Bryan
Customer: replied 8 years ago.
Reply to a1speedyappliance's Post: I shut down the power to the dishwasher for 3 min. Checked, the light was off but as soon as I tried anything, the red light turned on again. Does this mean it is the board and how can i be certain that this will not happen with the new board. Also do you know who the manufacturer is for Kenmore Elite Dishwasher Part # XXXXX
Expert:  Bryan replied 8 years ago.
its made by whirlpool. allot of those machines have a mismatched heater and board asm. depends on model, allot of times it will come in set, they recomend replacing both. is it not under warrenty, you mentioned newly installed. thanks Bryan
Bryan and other Appliance Specialists are ready to help you