How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask The Home Smithy Your Own Question
The Home Smithy
The Home Smithy, Home Appliance Technician
Category: Appliance
Satisfied Customers: 9619
Experience:  30 years repairing appliances
Type Your Appliance Question Here...
The Home Smithy is online now
A new question is answered every 9 seconds

whirlpool duet sport gas dryer with fault code F-02

Resolved Question:

No Comment Added
Submitted: 8 years ago.
Category: Appliance
Expert:  The Home Smithy replied 8 years ago.


What is the model number of your unit, please?

Customer: replied 8 years ago.
Reply to The Home Smithy's Post: I do not see a model number anywhere in the literature that came with the dryer. It is a whirlpool duet sport gas dryer. we ran a diagnostic mode and it showed a fault code of f-02. The keypad lights were out of sync and the power would not go on unless we unplugged it and replugged it. We let the diagnostic mode return to the standby mode and now the dryer starts up and runs normally. What would cause something like this and is it apt to happen frequently?
Expert:  The Home Smithy replied 8 years ago.

Ok was the unit flashinf PF at any time?

Have you had a power failure recently when the unit was runing?

The manufacturers tag should be on the inside of the lid/door

Customer: replied 8 years ago.
Expert:  The Home Smithy replied 8 years ago.

Ok these units are sensitive to power surges. What I suggest you do is install a good surge protector and this should remidy tthe problem.

For now I would not be concerned. If after you install the saurge protector it happens again in say the next week then you may be looking at a new control board..


If this answer satisfies your question please click the accept button. I will not be paid if you dont.

You can always ask follow up questions after you accept. I will be here to answer them.

If for some reason you are not happy. Please tell me what I can do to put a smile on your face.

Thank you for using Just Answer. Please tell someone about us.

Best regards; The Home Smithy

After you have accepted it is important that you leave positive feedback.

The Home Smithy and other Appliance Specialists are ready to help you

Related Appliance Questions