How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask MrBill Your Own Question
MrBill
MrBill, Home Appliance Technician
Category: Appliance
Satisfied Customers: 409
Experience:  Electrolux Authorized Servicer, 7 Years of in home experience
9256417
Type Your Appliance Question Here...
MrBill is online now
A new question is answered every 9 seconds

I have a Maytag washer Model LAT2600AAE and what it is ...

Customer Question

I have a Maytag washer Model LAT2600AAE and what it is doing when I select a mini load the machine will fill full all the way. What would cause this problem. Appreciate any help you can give me. We already changed the water level knob and that didn''t make any difference My email address [email protected] Thank You XXXXX
Submitted: 8 years ago.
Category: Appliance
Expert:  MrBill replied 8 years ago.

Hello,

I will be happy to help you out. You say you have replaced the pressure switch?

Thanks for using JustAnswer.com!

Bill

Customer: replied 8 years ago.
Yes I did that today. Replaced the pressure switch. Norman
Expert:  MrBill replied 8 years ago.

Hello,

It could be possible there is a partial restriction, or even a hole in the pressure switch hose.

Can you pull the hose off the back of the switch and blow through it.

Let me know what you find.

Thanks Again,

Bill

Sorry for the delay, computer issues

Customer: replied 8 years ago.
Reply to MrBill's Post: Yes I changed the water level switch today
Norman
Expert:  MrBill replied 8 years ago.

Hello,

Can you pull the hose off the switch and blow through the hose? There may be a partial restriction in the tube where it connects to the bottom of the wash tub.

Also when you put it back on make sure that the end is not damaged in anyway from removing it. Sometimes the end of the hose will get split or a tear in it when you remove it from the switch for the first time.

Double check these things and let me know what you find.

Thanks Again,

Bill

Customer: replied 8 years ago.
Thank You Bill for the help on the Maytag Washer
Expert:  MrBill replied 8 years ago.

Hello,

How did you make out. Was there an issue with the hose?

Let me know if you have anymore questions. I will be happy to help you out further.

Thanks for using JustAnswer.com!

Bill

Related Appliance Questions