How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Chuck G. Your Own Question
Chuck G.
Chuck G., Home Appliance Technician
Category: Appliance
Satisfied Customers: 343
Experience:  30 Yrs. Experience in the appliance repair field
8049636
Type Your Appliance Question Here...
Chuck G. is online now
A new question is answered every 9 seconds

How do I get my GE glasstop cookstove to quit beeping.

This answer was rated:

No Comment Added
Hi, Thank you for using justanswer for your appliance questions!
I need a little more info from you, so I can advise you better!
Please reply back with your model #

Chuck G.
Customer: replied 9 years ago.
jsp42bok4bb
Your range clock is whats beeping. First thing i would advise you to do is disconnect power for 5 minutes. Reapply power and after the unit goes thru its setup, hit cancel 2 times. This will reboot control. The see if that clears the beeping up. If not the control will need to be replaced.

Hope this helps!!

Let me know if you need more assistance or if you have any questions.
Thank you for using justanswer.com

Chuck G.
__________________
Please " ACCEPT " when your question has been completely answered so I may be compensated.
PLEASE LEAVE FEEDBACK!
Positive Feedback is very important, That is how we get rated! Bonuses are appreciated!
Customer: replied 9 years ago.
Reply to Chuck G.'s Post: There is no cancel button on the display panel
Customer: replied 9 years ago.
Also a FO was blinking earlier today and I turned off the power for 30 seconds, as it said in the manual..it still is beeping
ok , let me check something.....
here is the fault code list, bad news.... your electronic range control has failed, The clock assm.


GE
Range/Stove/Oven Fault Codes
Failure
Code
Condition
Check/Repair
F0 and F1
Failed Thermistor Control
Replace Electronic Range Control (ERC)
F2
Oven temp exceeds 590 w/ unlocked door
High resistance or interference in oven temperature sensor. Replace oven temperature sensor
F3
Open oven temperature sensor circuit
Replace oven temperature sensor
F4
Shorted wire (Oven temperature sensor)
Locate and correct
F7
A = Function pad button stuck or
B = Bad clock
Unstick button or
Replace Electronic Range Control (ERC)
F8
Component Failure
Replace Electronic Range Control (ERC)
F9
Program w/ door circuit
Check wiring



Customer: replied 9 years ago.
Ok...we went ahead and turned the power off, the clock is blinking and we have not touched anything, and the beeping has actually stopped. Do you think it is still the control panel that will need to be replaced?
Time will tell. The F0 code is an internal failure of the clock assm. Some times the clock gets mixed up, just like a pc. The microprocessor get confused and starts beeping. I hope this fixed yours!

Let me know if you need more assistance or if you have any questions.
Thank you for using justanswer.com

Chuck G.
__________________
Please " ACCEPT " when your question has been completely answered so I may be compensated.
PLEASE LEAVE FEEDBACK!
Positive Feedback is very important, That is how we get rated! Bonuses are appreciated!
Chuck G. and 4 other Appliance Specialists are ready to help you