How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Tom Goellner Your Own Question
Tom Goellner
Tom Goellner, Home Appliance Technician
Category: Appliance
Satisfied Customers: 1578
Experience:  32 yrs. experience servicing major appliances and HVAC equipment.
Type Your Appliance Question Here...
Tom Goellner is online now
A new question is answered every 9 seconds

If the hot surface igniter glows when calling for heat and ...

This answer was rated:

If the hot surface igniter glows when calling for heat and the gas valve does not open does this indicate a bad gas valve or are we gettin enough resistance from the glow coil???
Answered via Just Answer Chat.
Tom Goellner and 4 other Appliance Specialists are ready to help you
Customer You said the glow coil was glowing so (unlike a gas range which is wired differently ) the glow coil is not the problem - it's either the sensor or the valve solenoids but is you turn it on and it just glows and glows and glows and the valve never opens ( no flame ) the sensor is not opening

Related Appliance Questions