How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Glenn Your Own Question
Glenn
Glenn, Mechanic
Category: Appliance
Satisfied Customers: 2311
Experience:  over 30 years as a maintenance technician I have repaired many an Appliance I am also an electrician
281739
Type Your Appliance Question Here...
Glenn is online now
A new question is answered every 9 seconds

when troubleshooting the washer and the washer fails to ...

Customer Question

when troubleshooting the washer and the washer fails to fill with water you have already checked water pump for proper operation and the water pump is operational, what is you next step in this procedure?
Submitted: 9 years ago.
Category: Appliance
Expert:  Glenn replied 9 years ago.
Hello

Does it fill at all ?
Customer: replied 9 years ago.
possibles answer that I have are...
a. Inspect output line for kinks and/ or loose connections.
b. Inspect input line for kinks and/ or loose connections.
c. Inspect input line for kinks and/ or missing connectors.
d. Inspect output line for kinks and/ or missing connectors.
Expert:  Glenn replied 9 years ago.

Hello

water solonoide

Customer: replied 9 years ago.
must be one of the ones i send before
Expert:  Glenn replied 9 years ago.
HiCustomer Thank you for asking your question on Just Answer. The other Experts and I are working on your answer. By the way, it would help us to know:

-Could you explain your situation a little more?

Thank you again for trusting us with your problem. Please reply as soon as possible so that we can finish answering your question.
Customer: replied 9 years ago.
ok this is a question for a correspondece course the I take but is not material for the test. thanyou for you support.is a multiples choose so must be one of the answer the I give you.
Expert:  MrBill replied 9 years ago.

Hello,

They Should have a choice for Blocked Pressure Sensor hose, or defective pressure sensor switch.

Expert:  Glenn replied 9 years ago.

Hello

OK it's B if it were c it never would have worked

Customer: replied 9 years ago.
Reply to Glenn's Post: from the answer the I send you what will be the best answer
Expert:  Glenn replied 9 years ago.
Look up I said B