How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask The Home Smithy Your Own Question
The Home Smithy
The Home Smithy, Home Appliance Technician
Category: Appliance
Satisfied Customers: 9619
Experience:  30 years repairing appliances
Type Your Appliance Question Here...
The Home Smithy is online now
A new question is answered every 9 seconds

Hello, Defrost thermostat was just hanging down in the ...

Resolved Question:

Hello, Defrost thermostat was just hanging down in the evaporator area. Has a clip that looks like it should be snapped onto a refrigerant line. If so, does it make any difference which one?
Submitted: 8 years ago.
Category: Appliance
Expert:  The Home Smithy replied 8 years ago.


No not really. As long as it is located so that it receives a good reading from the overall condensor it should be fine. This reading can be taken from where both the lines enter the unit, or if they run the legnth of the condensors fins it is best placed in the center of the lines.

If this answer satisfies your question please click on the accept button. If it does not, please tell me so. You are not expected to accept any answer that you are not happy with.
I do expect you to let me know if you are not satisfied, and what I can do to put a smile on your face.

Thank you for using Just Answer. Please tell someone about us.
Best regards; The Home Smithy
After you have accepted it is important that you leave positive feedback.


The Home Smithy and 4 other Appliance Specialists are ready to help you

Related Appliance Questions