How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Chuck G. Your Own Question
Chuck G.
Chuck G., Home Appliance Technician
Category: Appliance
Satisfied Customers: 343
Experience:  30 Yrs. Experience in the appliance repair field
Type Your Appliance Question Here...
Chuck G. is online now
A new question is answered every 9 seconds

fridgedaire front loading washer wont start.

This answer was rated:

fridgedaire front loading washer wont start. Flashes "loc" then "err"
Hi, Thank you for using justanswer for your appliance questions!
I need a little more info from you, so I can advise you better!
Please reply back with your model #

Chuck G.
Chuck G. and other Appliance Specialists are ready to help you
Customer: replied 8 years ago.
Reply to Chuck G.'s Post: model #GLTF2940ES1 Fridgidaire Gallery Series Mfg by Electrolux 12/05

The door latch is white and appears to be intact & OK
Ok First things first. Press and hold the lock symbol for 5 seconds. See what happens
Customer: replied 8 years ago.
Reply to Chuck G.'s Post: The 'loc' symbol show up in the screen, there is no lock symbol to press. there is a lock light in a column with other lights for wash, spin etc. this light does not illuminate. Under this column of lights is a pause/cancel button. I already tried holding it, no change. I've tried hold it with the adjacent start button as well. no change.
Sorry for the delay, i will research this for you i will respond tomorrow 03MAR2008 / chuck
Customer: replied 8 years ago.
Thankyou! I promise you $20 additional if I can beat a service call $10 if you can give me anything that cuts down the service price. Thankyou for you efforts.
Ok I think i found it!

Turn the selector knob so the machine comes on then press the "options" and "select" buttons at the same time for 3 seconds. See if that works. Hope this helps!

Let me know if you need more assistance or if you have any questions.
Thank you for using

Chuck G.

Please "ACCEPT" when your question has been completely answered so I may be compensated.
Positive Feedback is very important. Bonuses are appreciated!

Related Appliance Questions