How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Michael L....JA Appliance Repairman Y...
Michael L....JA Appliance Repairman
Michael L....JA Appliance Repairman, 15 Years as Maintenance Technician
Category: Appliance
Satisfied Customers: 2287
Experience:  15 Years in the Maintenance field
283538
Type Your Appliance Question Here...
Michael L....JA Appliance Repairman is online now
A new question is answered every 9 seconds

I have Kenmore side by side refer dont know how to reset ...

This answer was rated:

I have Kenmore side by side refer dont know how to reset water filter change lite. M#596.51679100   sn.#0108196247    mfg.# XXXXX I also can not cross refn. part # XXXXX water filter,# XXXXX XXXXX

Hi and Welcome to Just Answer,

 

Ok, let's take a look at this;

 

To reset the CHANGE FILTER light: Press the light switch 5 times within 10 seconds. The Filter Status Light will change from red to green

If you need more help Let me know

 

 

 

If you find this post helpful please take a few minutes to leave Feedback.

By you leaving Positive Feedback you give your Expert additional opportunities to earn extra CASH and Recognition.

 

If you would like to give a Bonus they are always welcome.

 

If there is anything else let me know, If not click accept. Thank You Michael L.

Customer: replied 8 years ago.
Reply to Michael L....JA Appliance Repairman's Post: Hi this didnt work . I opened refer door pushed light switch 5 times then closed door.Didnt work. Also trided freezer????? also could use part # XXXXX filter oem # XXXXX

The waterfilter part number is XXXXX Water Filter item# XXXXX

Did you change the filter?

Customer: replied 8 years ago.
yes with kenmore 9006

ok, I found another reset instructions

setting your "change filter" light:

  • Press and hold the dispenser lock and auto light buttons on the dispenser (at the same time) for 4 seconds until the filter status indicator begins to flash, then release the buttons.

    OR

  • Press the dispenser lock and water buttons for 4 seconds until the filter status indicator begins to flash, then release the buttons.
Michael L....JA Appliance Repairman and other Appliance Specialists are ready to help you