Sounds like you have a bad high temprature sensor. This can be located on the heater pipe down stream from the burner just out of the flames reach. It is a small netal part that looks like a hat with an oblong brim. It will have two wires going to it and be secured by 2 sheet metal screws. Thare should be an access panel on the back lower right you can get to it with.
If this answer satisfies your question please click on the accept button. If it does not, please tell me so. You are not expected to accept any answer that you are not happy with. I do expect you to let me know if you are not satisfied, and what I can do to put a smile on your face.
Thank you for using Just Answer. Please tell someone about us.Best regards; The Home SmithyAfter you have accepted it is important that you leave positive feedback.