How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Michael L....JA Appliance Repairman Y...
Michael L....JA Appliance Repairman
Michael L....JA Appliance Repairman, 15 Years as Maintenance Technician
Category: Appliance
Satisfied Customers: 2287
Experience:  15 Years in the Maintenance field
283538
Type Your Appliance Question Here...
Michael L....JA Appliance Repairman is online now
A new question is answered every 9 seconds

The part that turns the dishwasher on and off ...

Resolved Question:

The part that turns the dishwasher on, located on the front of the machine, is getting hard to turn to the desired setting. What can I do?
Submitted: 9 years ago.
Category: Appliance
Expert:  Michael L....JA Appliance Repairman replied 9 years ago.
what is the make and model?
Customer: replied 9 years ago.
Reply to Michael L.......JA Appliance Repair's Post: whirlpool, under counter
model # XXXXX
Serial # XXXXX 14289
Expert:  Michael L....JA Appliance Repairman replied 9 years ago.

Hi and Welcome to Just Answer,

 

Ok, let's take a look at this;

Sounds like the time is getting old and stiff

Here is a link to see what you need to get to replace your time.

http://www.partselect.com/xq/aspx/Inventory.342817/qx/PartDetail.htm?SourceCode=1

 

 

If you need more help Let me know

 

 

 

If you find this post helpful please take a few minutes to leave Feedback.

By you leaving Positive Feedback you give your Expert additional opportunities to earn extra CASH and Recognition.

 

If you would like to give a Bonus they are always welcome.

 

If there is anything else let me know, If not click accept. Thank You Michael L.

Customer: replied 9 years ago.
Reply to Michael L.......JA Appliance Repair's Post: I went to the addy you supplied, but my lack of knowledge didn't help. I couldn't find what I needed. Thank you anyway. I am sure that some one with more knowledge than myself couod get a lot of help from this info. Carolanna
Expert:  Michael L....JA Appliance Repairman replied 9 years ago.

what you need is Number 8 of the drawing, it is a timer that needs to be replaced. you may want to have a repairman replace it for you.

 

 

Michael L....JA Appliance Repairman and 6 other Appliance Specialists are ready to help you
Customer: replied 9 years ago.
Not the answer I needed, but thank you
Expert:  Michael L....JA Appliance Repairman replied 9 years ago.
ok, Thanks for letting me try... :)