How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Wayne Your Own Question
Wayne, Journeyman
Category: Agriculture and Farm Equipment
Satisfied Customers: 9217
Experience:  34 + years as a mechanic
Type Your Agriculture and Farm Equipment Question Here...
Wayne is online now
A new question is answered every 9 seconds

I have a deere 70, it is not getting gas. i have worked on

Customer Question

I have a John deere 70, it is not getting gas. i have worked on the sediment bowl, it works, have gas in the carberator bowl, but it wont fire unless i put gas in the spark plug hole.
JA: Sometimes things that you think will be really complicated end up being easy to fix. The Heavy Equipment Mechanic I'm going to connect you with knows all the tricks and shortcuts.
Customer: My Jd 70 is not getting gas to the cylinders, it will run if i put gas in the spark plug hole it will run until its gone. i have gas in the carborator bowl the sediment bowl works,
JA: Anything else you want the agriculture mechanic to know before I connect you?
Customer: i tried starting it and eventually it got gas in the oil. i put in new oil and i cant get gas to the plugs, unless i prime the hole.
Submitted: 11 days ago.
Category: Agriculture and Farm Equipment
Customer: replied 11 days ago.
Im confused about what this is going to cost to get an answer! it started out at 5$ but after i put my card# ***** it said 40 something??? im not liking this so far!
Customer: replied 11 days ago.
Cancel my order!
Expert:  Wayne replied 11 days ago.

Hi I'm Wayne

I will help you with this

What you are describing is the jet clogged in the carb

if it runs for a few seconds pouring gas in the carb

what needs to be done, carb off,disassemble

boil out in a pot of hot water for 10-15 min

air dry ,then assemble , this will clean it out

Hi If this helped you

Please rate my answer 3 or more stars

That is the only way I get credit for the question

Or the money you paid stays at JA and I get nothing for my time

If you need more info use the INFO button

Not the Poor/Bad service