How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask dd85 Your Own Question
dd85
dd85, Foreman
Category: Agriculture and Farm Equipment
Satisfied Customers: 495
Experience:  Service manger for over 18 years in same Dealership
15057492
Type Your Agriculture and Farm Equipment Question Here...
dd85 is online now
A new question is answered every 9 seconds

On my New Holland 5 foot brushcutter, I can't tell if there

Customer Question

On my New Holland 5 foot brushcutter, I can't tell if there are two grease fittings on the end that attaches to the machine (the tractor PTO part is easy).
I grease the nipple that I can see, but there seems to be another one that is inaccessible; it is behind the shields and I can't reach it with anything or even see it clearly.
Can you tell me if "it is really there" and, if so, how to grease it without taking all the shields off.
Submitted: 3 months ago.
Category: Agriculture and Farm Equipment
Expert:  dd85 replied 3 months ago.

Do you have the Model number of the Cutter?

Does it have a CV joint? if so there should be a hole in the shield that when turned just right will line up with the grease zerk.

Related Agriculture and Farm Equipment Questions