How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Curtis B. Your Own Question
Curtis B.
Curtis B., Technician
Category: Agriculture and Farm Equipment
Satisfied Customers: 26030
Experience:  Technican turned service manager on multiple lines of equipment and rental equipment.
30244710
Type Your Agriculture and Farm Equipment Question Here...
Curtis B. is online now
A new question is answered every 9 seconds

My la130 won't disengage blades, switch is new, with switch

Customer Question

my la130 won't disengage blades, switch is new , with switch in it will clunk when pto burron us pulled up and click when it is pushed down. There is som sort of metal piece sticking out of the pto., next to the magnets, will move a little ehen in th off position but tight when it is on
JA: What is the complete model and serial number of your machine?
Customer: 260829yg36813, don't hVE THE SERIAL NO
JA: Anything else you want the agriculture mechanic to know before I connect you?
Customer: NOT THAT I KNOW OF
Submitted: 2 months ago.
Category: Agriculture and Farm Equipment
Expert:  Curtis B. replied 2 months ago.

Hi,let's see if we can work together to get to the root of your problem! will try my best to help!

Expert:  Curtis B. replied 2 months ago.

Unplug the pto clutch harness at the electric clutch. The see if the pulley rotates freely or is seized and will only turn with the engine. If it has a bad bearing and has seized, it will not rotate freely and will not disengage! The clutch would have to be replaced.

Expert:  Curtis B. replied 2 months ago.

I see question is still open, did you find clutch to be siezed?