How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Curtis B. Your Own Question
Curtis B.
Curtis B., Technician
Category: Agriculture and Farm Equipment
Satisfied Customers: 26055
Experience:  Technican turned service manager on multiple lines of equipment and rental equipment.
30244710
Type Your Agriculture and Farm Equipment Question Here...
Curtis B. is online now
A new question is answered every 9 seconds

How to change a rear axle seal on a 4310 power/reverser

Customer Question

How to change a rear axle seal on a 4310 power/reverser
Submitted: 2 months ago.
Category: Agriculture and Farm Equipment
Expert:  Curtis B. replied 2 months ago.

Hi,let's see if we can work together to get to the root of your problem! will try my best to help!

Expert:  Curtis B. replied 2 months ago.

Are you aware that you have to remove the trumpet housing from the center housing to get at the # 8 snap ring that holds the axle in the housing? See picture above in the link.

Expert:  Curtis B. replied 2 months ago.

I see question is still open, did you see my response and link?