How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Wayne Your Own Question
Wayne
Wayne, Journeyman
Category: Agriculture and Farm Equipment
Satisfied Customers: 8596
Experience:  34 + years as a mechanic
6825259
Type Your Agriculture and Farm Equipment Question Here...
Wayne is online now
A new question is answered every 9 seconds

I have kubota model R510 serial 20609 need to remove left

Customer Question

i have kubota model R510 serial 20609 need to remove left side axle
JA: What is the complete model and serial number of your machine?
Customer: model R510 serial20609
JA: Are you fixing this yourself? What have you tried so far?
Customer: yes i'm a framer i just remove the tire
JA: Anything else you want the agriculture mechanic to know before I connect you?
Customer: no just how removal alx
Submitted: 4 months ago.
Category: Agriculture and Farm Equipment
Expert:  Curtis B. replied 4 months ago.

Hi,let's see if we can work together to get to the root of your problem! will try my best to help!

Expert:  Curtis B. replied 4 months ago.

Here is link showing front axle, but rear is done the same way. The trumpet housing has to be removed, to access the inner nut on the axle shaft, then with the nut off, the axle shaft can be removed from the housing. See link below.

Customer: replied 4 months ago.
I got that picture from the dealer my question how to get the axle out?
Expert:  Curtis B. replied 4 months ago.

The trumpet housing has to be removed, to access the inner nut on the axle shaft, then with the nut off, the axle shaft can be removed from the housing. With nut off, the axle will drive out.

Expert:  Curtis B. replied 4 months ago.

I see question is still open, did you get the nut off the inner axle shaft end?

Customer: replied 2 months ago.
I'd like to try working with a different Expert please.
Expert:  Wayne replied 2 months ago.

Hi I'm Wayne

I will try to help you with this

I do not have much to offer ,but what Curtis explained is correct

after you remove the housing, remove the "C" clip

then the axle will pull out after you then remove the bolt and washer at the end of axle

Related Agriculture and Farm Equipment Questions