How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Wayne Your Own Question
Wayne, Journeyman
Category: Agriculture and Farm Equipment
Satisfied Customers: 8286
Experience:  34 + years as a mechanic
Type Your Agriculture and Farm Equipment Question Here...
Wayne is online now
A new question is answered every 9 seconds

Trying to install new fan belt on 6410 jd, L06410p trying to

Customer Question

Trying to install new fan belt on 6410 jd
JA: What is the complete model and serial number of your machine?
Customer: L06410p trying to install new fan belt
JA: Are you fixing this yourself? What have you tried so far?
Customer: Yes
JA: Anything else you want the equipment mechanic to know before I connect you?
Customer: Took off fan nuts won't slide up enough to take off
Submitted: 1 month ago.
Category: Agriculture and Farm Equipment
Expert:  Wayne replied 1 month ago.

Hi I'm Wayne

I will help you with this

go to this site it is same as your 6410 click here

I hope this helped you

Hi. If this helped you,

Please remember to rate my answer 3 or more stars.

I do not get paid for question, unless you rate my answer

If more info is needed, use the reply button -


Customer: replied 1 month ago.
My fan does not have 6 bolts. Only 4 on pully. Will not move off studs to get belt around
Expert:  Wayne replied 1 month ago.


Soak it with penetrating oil, it will come loose

also tap on it with small hammer between studs

Customer: replied 1 month ago.
No not enough room
Customer: replied 1 month ago.
I may have to pull radiator forward.
Expert:  Wayne replied 1 month ago.


Sorry for the delay

yes, you can loosen and tilt if forward it a little

to the the room,


Expert:  Wayne replied 1 month ago.


Just a follow up with you

did my answer help you

let me know, please