How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Curtis B. Your Own Question
Curtis B.
Curtis B., Technician
Category: Agriculture and Farm Equipment
Satisfied Customers: 25686
Experience:  Technican turned service manager on multiple lines of equipment and rental equipment.
Type Your Agriculture and Farm Equipment Question Here...
Curtis B. is online now
A new question is answered every 9 seconds

How to flush hydraulic system bx24

Customer Question

how to flush hydraulic system bx24
Submitted: 1 month ago.
Category: Agriculture and Farm Equipment
Expert:  Curtis B. replied 1 month ago.

Did the old oil have water that was visible when you removed the drain plug on the transmission? Only way to actually flush system is to operate the unit long enough to warm the oil, and then drain it when hot, replacing with new oil and filter. In severe cases, you have to do it two or even three times. But you do not want to have any water in the oil. But some oils show to be milky, and can also be caused by the pump sucking air into the system. Are the hydraulics jerky? Do you see air in the oil? oil and air coming out the vent ?

Related Agriculture and Farm Equipment Questions