How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Wayne Your Own Question
Wayne
Wayne, Journeyman
Category: Agriculture and Farm Equipment
Satisfied Customers: 8426
Experience:  34 + years as a mechanic
6825259
Type Your Agriculture and Farm Equipment Question Here...
Wayne is online now
A new question is answered every 9 seconds

How do I check the Hydraulic fluid level on 1965 Ford 3000

Customer Question

How do I check the Hydraulic fluid level on 1965 Ford 3000 diesel tractor? I'm having difficulty finding the plug location.
JA: Sometimes things that you think will be really complicated end up being easy to fix. The Heavy Equipment Mechanic I'm going to connect you with knows all the tricks and shortcuts. Tell me a bit more about what's going on so the Heavy Equipment Mechanic can help you best.
Customer: I'm having difficulty finding the plug location to check hydraulic fluid level on my 1965 Ford 3000 diesel tractor.
JA: Is there anything else the Heavy Equipment Mechanic should be aware of?
Customer: Don't think so...
Submitted: 3 months ago.
Category: Agriculture and Farm Equipment
Expert:  Wayne replied 3 months ago.

Hi I'm Wayne

I will help you with this

Hydraulic system oil is added through the filler cap under the seat . The oil level check plug is a 1/4 inch pipe plug located on the RH side of the axle housing a little ways above the floorboard about in line where your heel would be if you were in the seat

I hope this helped you

Hi. If this helped you,

please remember to rate my answer 3 or more stars.

If more info is needed, use the reply button -

NOT THE POOR/BAD SERVICE

Expert:  Wayne replied 3 months ago.

HI

Just a follow up with you

did my answer help you

let me know, Please

Wayne