How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask dd85 Your Own Question
dd85
dd85, Foreman
Category: Agriculture and Farm Equipment
Satisfied Customers: 492
Experience:  Service manger for over 18 years in same Dealership
15057492
Type Your Agriculture and Farm Equipment Question Here...
dd85 is online now
A new question is answered every 9 seconds

When starting to build the clutch starts to slip and belts

Customer Question

when starting to build bale the clutch starts to slip and belts stops turning
Submitted: 3 months ago.
Category: Agriculture and Farm Equipment
Expert:  dd85 replied 3 months ago.

Is the PTO shaft clutch the one slipping?

Have you tightened the 6 bolts to 45 ft.lbs. / 54-61 N-m?

if it has been slipped a lot you may need to replace the clutch discs.