How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Wayne Your Own Question
Wayne
Wayne, Journeyman
Category: Agriculture and Farm Equipment
Satisfied Customers: 8438
Experience:  34 + years as a mechanic
6825259
Type Your Agriculture and Farm Equipment Question Here...
Wayne is online now
A new question is answered every 9 seconds

What to do when my 5610 ford tractor ac want cycle on and

Customer Question

what to do when my 5610 ford tractor ac want cycle on and off after replacing compressor and charging system i need to know the system capacity and the correct low and high gauge setting when ambient temp is 90 degrees i used r134 feron i also replaced expansion valve
Submitted: 4 months ago.
Category: Agriculture and Farm Equipment
Expert:  Wayne replied 4 months ago.

Hi I'm Wayne

I will help you with this

sounds like your low on freon

your system is 2.75 Lbs of R134a

lowside pressure 40-48 lbs

high side 290 to 325 Psi

I hope this helped you

Hi if this helped you

Please rate my answer 3 or more stars

If need more info use the info button

Not Poor/Bad service