How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Curtis B. Your Own Question
Curtis B.
Curtis B., Technician
Category: Agriculture and Farm Equipment
Satisfied Customers: 26040
Experience:  Technican turned service manager on multiple lines of equipment and rental equipment.
30244710
Type Your Agriculture and Farm Equipment Question Here...
Curtis B. is online now
A new question is answered every 9 seconds

Agco allis 5650 tractor.when ignition switch turned on

Customer Question

agco allis 5650 tractor.when ignition switch turned on nothing happens. no starter no lights. nothing!.the battery is good and fully charged.when i last used the tractor 1 week ago i left the key in the ignition switch, but in the off position. i have checked the fuses in the main fuse panel, all are ok.any idea to what is the problem?
Submitted: 5 months ago.
Category: Agriculture and Farm Equipment
Expert:  Curtis B. replied 5 months ago.

No voltage to the keyswitch? Go back to the starter, and check the battery cable and the smaller wires, which are what powers the fuse panel and switch. Look for a fusible link in the ground wires around the starter. The parts manual doesn't show one, but is a common place for a fusible link. Will look like a fuse soldered into the wire. Cane be checked with a ohm meter for continuity, or bypassed for test.

Expert:  Curtis B. replied 5 months ago.

i see question is still open, did you see my response?