How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Curtis B. Your Own Question
Curtis B.
Curtis B., Technician
Category: Agriculture and Farm Equipment
Satisfied Customers: 25679
Experience:  Technican turned service manager on multiple lines of equipment and rental equipment.
Type Your Agriculture and Farm Equipment Question Here...
Curtis B. is online now
A new question is answered every 9 seconds

I have a m4700 that is blowing hydrolic fluid at front of

Customer Question

I have a m4700 that is blowing hydrolic fluid at front of pump where square gasket is located is that the only problem or is there an internal seal gone also
Submitted: 4 months ago.
Category: Agriculture and Farm Equipment
Expert:  Curtis B. replied 4 months ago.

The pump will have a shaft seal, and if hydraulic oil is coming out the front mounting area, this internal seal is leaking! See pump and mounting link below.

Expert:  Curtis B. replied 3 months ago.

I see question is still open, did you see my response and picture?