How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Curtis B. Your Own Question
Curtis B.
Curtis B., Technician
Category: Agriculture and Farm Equipment
Satisfied Customers: 26739
Experience:  Technican turned service manager on multiple lines of equipment and rental equipment.
30244710
Type Your Agriculture and Farm Equipment Question Here...
Curtis B. is online now
A new question is answered every 9 seconds

Kx121-2 mini excativator cannot get the slack adjuster to release

Customer Question

kx121-2 mini excativator cannot get the slack adjuster to release . have removed the gease fitting and the bigger fitting it seats in
Submitted: 10 months ago.
Category: Agriculture and Farm Equipment
Expert:  Curtis B. replied 10 months ago.
Nothing else holds the grease in the cylinder, it may not be straight, and is bonding, did you try moving th cylinder rod, u[/down, side to side? Or put the grease fitting back in and extend it further, then try releasing it. Be sure the track and idler is free to move back. See picture attached.
Expert:  Curtis B. replied 10 months ago.
Did you get my response?