How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Curtis B. Your Own Question
Curtis B.
Curtis B., Technician
Category: Agriculture and Farm Equipment
Satisfied Customers: 3327
Experience:  Technican turned service manager on multiple lines of equipment and rental equipment.
30244710
Type Your Agriculture and Farm Equipment Question Here...
Curtis B. is online now
A new question is answered every 9 seconds

I have an 8465 round baler with net wrap. After the baler has

Customer Question

I have an 8465 round baler with net wrap. After the baler has wrapped the bale it will not cut the wrap. Can you tell me what adjustments need to be made? It does this every bale. Sherwin
Submitted: 11 months ago.
Category: Agriculture and Farm Equipment
Expert:  Bradley Martin replied 11 months ago.
How long has it done this?
Customer: replied 11 months ago.
Since the start of this season. Hydraulic pressure on baler system is running 1500 psi.
Expert:  Bradley Martin replied 11 months ago.
Have you made sure you have the right twine I have seen multiple times it will not cut the wrap because people are not using the right twine