How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Curtis B. Your Own Question
Curtis B.
Curtis B., Technician
Category: Agriculture and Farm Equipment
Satisfied Customers: 25661
Experience:  Technican turned service manager on multiple lines of equipment and rental equipment.
Type Your Agriculture and Farm Equipment Question Here...
Curtis B. is online now
A new question is answered every 9 seconds

I cant seem to get the rear coupling installed on the mower

Customer Question

i cant seem to get the rear coupling installed on the mower deck. the tech at the dealer told me to hold the coupler back with channel locks and slip it on but i still cant seem to get it to line up properly there has to be a easier way can you help?
Submitted: 6 months ago.
Category: Agriculture and Farm Equipment
Expert:  Curtis B. replied 6 months ago.
Splines are a really close fit, but take the shaft and start the spline, that is the hard part, getting it to just start, then you need to pull back on the outer housing , as you push shaft forward, so it will slip up to the latch notch. There is no easy way!

Related Agriculture and Farm Equipment Questions