How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Curtis B. Your Own Question
Curtis B.
Curtis B., Technician
Category: Agriculture and Farm Equipment
Satisfied Customers: 3111
Experience:  Technican turned service manager on multiple lines of equipment and rental equipment.
30244710
Type Your Agriculture and Farm Equipment Question Here...
Curtis B. is online now
A new question is answered every 9 seconds

2950.. 3 pt hitch won't move till the min max setting is at

Customer Question

2950.. 3 pt hitch won't move till the min max setting is at max then the control lever operates opposite of normal.. Down is up and won't hold position.. Either all the way up or down..if left in between hydraulics load up
Submitted: 8 months ago.
Category: Agriculture and Farm Equipment
Expert:  Bradley Martin replied 8 months ago.
Hello I will try and help you I would first check your rockshaft housing seals and valve The picture I sent I circled the valve check those O-rings and make sure they are not cut