How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Curtis B. Your Own Question
Curtis B.
Curtis B., Technician
Category: Agriculture and Farm Equipment
Satisfied Customers: 26033
Experience:  Technican turned service manager on multiple lines of equipment and rental equipment.
30244710
Type Your Agriculture and Farm Equipment Question Here...
Curtis B. is online now
A new question is answered every 9 seconds

I am having hydraulic problems with a 1966 massey ferguson

Customer Question

i am having hydraulic problems with a 1966 massey ferguson 135. When you lift the three pth it automaticly goes all the way up then knoks you then have to lower both levers and wait for it to start down. then you need to put one lever in constancs pumping and try to keep the hieght with the other. if you move the up lever at all then the whole process starts again
Submitted: 8 months ago.
Category: Agriculture and Farm Equipment
Expert:  Curtis B. replied 8 months ago.

The valves for the three point are part of the hydraulic pump, under the three point cover! You likely have debris from the old filter keeping the valves from moving properly. The pump would need to be removed and all valves cleaned, after the pto shaft and the three point housing removed to gain access!