How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Bradley Martin Your Own Question
Bradley Martin
Bradley Martin,
Category: Agriculture and Farm Equipment
Satisfied Customers: 173
Experience:  Field Technician at Thompson Tractor Company
29889544
Type Your Agriculture and Farm Equipment Question Here...
Bradley Martin is online now
A new question is answered every 9 seconds

No lights no dash lights stater not turning Changed battery

Customer Question

No lights no dash lights stater not
turning
Changed battery cleaned ground and cables
No power to the switch
Submitted: 8 months ago.
Category: Agriculture and Farm Equipment
Expert:  Bradley Martin replied 8 months ago.

What are you working on?

Customer: replied 8 months ago.
Kabota L2800
Expert:  Bradley Martin replied 8 months ago.

You have no power coming to switch is that correct

Expert:  Bradley Martin replied 8 months ago.

My phone is not working I will be glad to help you over the site though

Customer: replied 8 months ago.
That's correct
Expert:  Bradley Martin replied 8 months ago.

I think there is a fuse at the battery is that fuse good

Customer: replied 8 months ago.
There's three fuses they all look good
Key switch fuse it's good
Main fuse they are good
Expert:  Bradley Martin replied 8 months ago.

Do you have any jumper wires you can run a hot wire from battery to switch and see if everything works normal

Expert:  Bradley Martin replied 8 months ago.

If everything works normal after that cut and splice a new wire from key switch fuse to key switch

Customer: replied 8 months ago.
Ok will try that
Expert:  Bradley Martin replied 8 months ago.

Let me know how it goes and please rate me when you have a chance

Customer: replied 8 months ago.
Jumper cables made it click and lights on
Unable to turn key
It should start
How to fix correct
Expert:  Bradley Martin replied 8 months ago.

Cut the wire after the keyswitch fuse and splice a new wire in and then run the new wire along the wiring harness into the dash and install where the hot wire on the switch that is bad

Expert:  Bradley Martin replied 8 months ago.

Were you able to run a new wire?

Expert:  Bradley Martin replied 8 months ago.

Any update today?