How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Curtis B. Your Own Question
Curtis B.
Curtis B., Technician
Category: Agriculture and Farm Equipment
Satisfied Customers: 3264
Experience:  Technican turned service manager on multiple lines of equipment and rental equipment.
30244710
Type Your Agriculture and Farm Equipment Question Here...
Curtis B. is online now
A new question is answered every 9 seconds

I have a Yanmar FX24 diesel tractor that won't go into gear

Customer Question

I have a Yanmar FX24 diesel tractor that won't go into gear after getting stuck in the woods while mowing. Is the transmission shot or what could be the solution.
Submitted: 1 year ago.
Category: Agriculture and Farm Equipment
Expert:  Wayne replied 1 year ago.

Hi I'm Wayne

I will help you with this

does it go into gear but not move

can you shift into gear but grinds

let me know, Please

Customer: replied 1 year ago.
I can shift it into gear but it doesn't move in any gear. It doesn't grind either.
Expert:  Wayne replied 1 year ago.

Morning

sorry for delay , I go off line at 7Pm CST

sounds like you have clutch issues, or input shaft of trans

if you do not step on the clutch and try to put into gear

will it grind then, let me know

Customer: replied 1 year ago.
I got it out of the woods. It has 3 forward gears and one reverse on the right hand gear shift. It has 3 gears on the left gear shift giving it 9 forward and 3 reverse. The reverse on the right gear shift works and all of the 3 gears on the left shifter work. The 3 forward gears on the right gear shift do not work and there is no noise. It can be worked automatically with no clutch normally.
Expert:  Wayne replied 1 year ago.

Morning

Thank you for that

I will pt out of this and post back to board for another expert

Sorry I cold not help you