How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Dan Your Own Question
Dan
Dan, Technician
Category: Agriculture and Farm Equipment
Satisfied Customers: 4401
Experience:  17+ yrs. shop and field experience with all major brands of heavy equipment, trucks and farm equipment - 1995 WyoTech graduate.
65405794
Type Your Agriculture and Farm Equipment Question Here...
Dan is online now
A new question is answered every 9 seconds

The PTO lever on my ZD321 will not move to the forward

Customer Question

The PTO lever on my ZD321 will not move to the forward position to engage the blades.
Submitted: 9 months ago.
Category: Agriculture and Farm Equipment
Expert:  Dan replied 9 months ago.

Hi Dudley my name is***** is the serial number?

Expert:  Dan replied 9 months ago.

A common problem on these mowers is the linkage binding or jamming if worn, bent or seized. Check the linkage for problems or alignment issues. Here is a diagram. Let me know

Diagram

Customer: replied 9 months ago.
Serial #: 10662
Expert:  Dan replied 9 months ago.

Thanks for the info. Take a close look at the linkage for troubles as its the most common cause of this. Let me know

Expert:  Dan replied 9 months ago.

Hi, Did you get this resolved?

Related Agriculture and Farm Equipment Questions