How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Curtis B. Your Own Question
Curtis B.
Curtis B., Technician
Category: Agriculture and Farm Equipment
Satisfied Customers: 26033
Experience:  Technican turned service manager on multiple lines of equipment and rental equipment.
30244710
Type Your Agriculture and Farm Equipment Question Here...
Curtis B. is online now
A new question is answered every 9 seconds

My 1140 kubota rtv won't start solenoid clicks but starter

Customer Question

Customer: my 1140 kubota rtv won't start solenoid clicks but starter won't turn over
JA: Thanks. Can you give me any more details about your issue?
Customer: I changed starter with another 1140 i have that i know works. its a 2013 turn key solenoid clicks
JA: OK got it. Last thing — Mechanics generally expect a deposit of about $18 to help with your type of question (you only pay if satisfied). Now I'm going to take you to a page to place a secure deposit with JustAnswer. Don't worry, this chat is saved. After that, we will finish helping you.
Submitted: 10 months ago.
Category: Agriculture and Farm Equipment
Expert:  Curtis B. replied 10 months ago.

What is battery voltage at the solenoid?

Expert:  Curtis B. replied 10 months ago.

What is voltage to the switch terminal at the starter , when key is turned to start?

Expert:  Curtis B. replied 10 months ago.

Low voltage to the switch terminal will cause this. Have to have at least 12 volts.

Customer: replied 10 months ago.
i will have to check voltage
Expert:  Curtis B. replied 10 months ago.

OK, voltage problem is likely cause. I assume battery is up and above 13 volts?

Customer: replied 10 months ago.
ok thanks
Expert:  Curtis B. replied 10 months ago.

Thank you!