How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Curtis B. Your Own Question
Curtis B.
Curtis B., Technician
Category: Agriculture and Farm Equipment
Satisfied Customers: 27042
Experience:  Technican turned service manager on multiple lines of equipment and rental equipment.
30244710
Type Your Agriculture and Farm Equipment Question Here...
Curtis B. is online now
A new question is answered every 9 seconds

BX 2200 HST was working fine then I heard a soft pop and

Customer Question

BX 2200 HST was working fine then I heard a soft pop and lost both forward and reverse. Fluid level good, filter good. Input shaft turning. All other hydraulics working. 460 hrs on machine.
Submitted: 1 year ago.
Category: Agriculture and Farm Equipment
Expert:  Curtis B. replied 1 year ago.

You say input shaft is turning into transmission? Coupler on transmission end not broken?

Expert:  Curtis B. replied 1 year ago.

No travel in two wheel or four wheel drive?

Expert:  Curtis B. replied 1 year ago.

Was tractor in strain?

Expert:  Curtis B. replied 1 year ago.

The drive shaft from engine to the transmission input is the most common failure with coupler on either end stripping out.

Expert:  Curtis B. replied 1 year ago.

If it were axle problem, it would affect one end only. You could move tractor with the front axle if rear axle was broken.

Expert:  Curtis B. replied 1 year ago.

Will pto shaft turn when engaged? If not, the transmission is not turning