How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Curtis B. Your Own Question
Curtis B.
Curtis B., Technician
Category: Agriculture and Farm Equipment
Satisfied Customers: 26044
Experience:  Technican turned service manager on multiple lines of equipment and rental equipment.
30244710
Type Your Agriculture and Farm Equipment Question Here...
Curtis B. is online now
A new question is answered every 9 seconds

LA 211 Loader when loader is rotated all the way down it

Customer Question

LA 211 Loader when loader is rotated all the way down it will not go back up unless I push the bucket past a certain point. Is this a bucket cylinder problem?
Submitted: 11 months ago.
Category: Agriculture and Farm Equipment
Expert:  Curtis B. replied 11 months ago.

Cylinder problem, or there is a bucket stop that has come off, letting cylinder go to far.

Expert:  Curtis B. replied 11 months ago.

Look for a missing stop, that could have been welded on, that keeps bucket from tilting forward too far. If bucket cylinder goes too far, it can't get enough power to tilt back.

Expert:  Curtis B. replied 11 months ago.

If no stop, you can disassemble the cylinder and add a stop inside cylinder, so the rod will not extend as far.

Expert:  Curtis B. replied 11 months ago.

Did you find the problem?