How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Curtis B. Your Own Question
Curtis B.
Curtis B., Technician
Category: Agriculture and Farm Equipment
Satisfied Customers: 26043
Experience:  Technican turned service manager on multiple lines of equipment and rental equipment.
30244710
Type Your Agriculture and Farm Equipment Question Here...
Curtis B. is online now
A new question is answered every 9 seconds

Put knew hydro pump in b2400 hst how do I test / adjust

Customer Question

Put knew hydro pump in b2400 hst how do I test / adjust pressure
Submitted: 11 months ago.
Category: Agriculture and Farm Equipment
Expert:  Curtis B. replied 11 months ago.

Relief valve is in the top of the three point housing. You have to install gage at the plug just below the relief valve, or use the plug on the loader valve if you have a loader. You have to bottom the hydraulics for it to go to the maximum pressure. Adjustment is by removing or adding shims.

Expert:  Curtis B. replied 11 months ago.

Please rate to close the question.