How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Kevin Your Own Question
Kevin
Kevin, Technician
Category: Agriculture and Farm Equipment
Satisfied Customers: 729
Experience:  Over ten years of expirence in Ag Electronics and Hydraulics
32685367
Type Your Agriculture and Farm Equipment Question Here...
Kevin is online now
A new question is answered every 9 seconds

Jd 4400 combine. came with bean head, just purchased 443

Customer Question

jd 4400 combine. came with bean head, just purchased 443 corn head. cannot seem to get grain head off. any advise???
Submitted: 1 year ago.
Category: Agriculture and Farm Equipment
Expert:  Kevin replied 1 year ago.

Hello, my name is ***** ***** I can help you with your question.

Later model heads would have utilized the two latching pins under the feeder house. If the head happens to be an earlier model then it would actually be bolted on at the lower left corners of the feeder house. Typically there was one 1/2" bolt on either side that would have been used to lock the head to the machine. This would apply to the pre 200 series grain platform. If the bolts are removed, the latch pins fully retracted, and the drive chains off then the head should come right off.

Please let me know if I can be of any further assistance.

Thanks,

Kevin