How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Curtis B. Your Own Question
Curtis B.
Curtis B., Technician
Category: Agriculture and Farm Equipment
Satisfied Customers: 26026
Experience:  Technican turned service manager on multiple lines of equipment and rental equipment.
30244710
Type Your Agriculture and Farm Equipment Question Here...
Curtis B. is online now
A new question is answered every 9 seconds

Farmtrac 550 will not go into

Customer Question

Farmtrac 550 will not go into*****
Submitted: 1 year ago.
Category: Agriculture and Farm Equipment
Expert:  Curtis B. replied 1 year ago.

Looking at what I think you have, the 4wd is manually engaged at the transmission, and has a drive shaft from the transmission to the front axle. The drive shaft has two couplers, one at each end , under the cover. Remove the front cover and see if the shaft is turning My thinking is one of the couplers is broken or stripped.