How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask JBFixxer Your Own Question
JBFixxer
JBFixxer, Mechanic
Category: Agriculture and Farm Equipment
Satisfied Customers: 285
Experience:  16+ years experience, hydraulics,hydrostatics, engines, fuel injection systems. And everything in between.
18883126
Type Your Agriculture and Farm Equipment Question Here...
JBFixxer is online now
A new question is answered every 9 seconds

1972 JD 1520 ag tractor new hyd.pump three point and

Customer Question

1972 JD 1520 ag tractor new hyd.pump three point and steering try to work it has remote hyd. connections also. thx
Submitted: 1 year ago.
Category: Agriculture and Farm Equipment
Expert:  JBFixxer replied 1 year ago.

Hello and thank you for using Just Answer. Could you be a little more descriptive as to what the symptoms are? Also, more importantly, what, if any, function began giving you problems before they both failed?

Customer: replied 1 year ago.
Weird hyd.noises brakes and steering intermittent when hot three point also
Expert:  JBFixxer replied 1 year ago.

Generally speaking, on these tractors, the cure on these can lead to a hit or miss/trial and error. The few I have dealt with, the problem was in the steering column. However, this was only discovered after resealing the scv valve and the rockshaft housing. One thing you can do is isolate the source of the noise and also, the warmest component(the heat would indicate where hydraulic oil is going past a seal). When the seals go in the steering, the oil dumps directly into the transmission.

Expert:  JBFixxer replied 1 year ago.

Also, you will want to verify that the hydraulic oil filter can is seated properly and that the gasket is in place and in good shape. An air leak at that point could very easily cause your hydraulics to be intermittent.