How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Curtis B. Your Own Question
Curtis B.
Curtis B., Technician
Category: Agriculture and Farm Equipment
Satisfied Customers: 3166
Experience:  Technican turned service manager on multiple lines of equipment and rental equipment.
30244710
Type Your Agriculture and Farm Equipment Question Here...
Curtis B. is online now
A new question is answered every 9 seconds

I have a woods lu126 front end loader on my ford tractor and

Customer Question

i have a woods lu126 front end loader on my ford tractor and when tilting the bucket to empty the last 8 inches there is a dead spot and it stops wont go all the way tipped down unless you move lever up and down rapidly then it goes to furthest point of travel
Submitted: 1 year ago.
Category: Agriculture and Farm Equipment
Expert:  Curtis B. replied 1 year ago.

Remove one end of one of the bucket cylinders, and work the bucket empty. The loose cylinder should move end and out freely. If not, the cylinder is binding, or bent. If it moves freely, and the bucket still stops, reattach and test the other one!

Customer: replied 1 year ago.
i will try that tomorrow and let you know what happens
Expert:  Curtis B. replied 1 year ago.

Ok, I should be around!

Related Agriculture and Farm Equipment Questions