How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Curtis B. Your Own Question
Curtis B.
Curtis B., Technician
Category: Agriculture and Farm Equipment
Satisfied Customers: 26029
Experience:  Technican turned service manager on multiple lines of equipment and rental equipment.
30244710
Type Your Agriculture and Farm Equipment Question Here...
Curtis B. is online now
A new question is answered every 9 seconds

Mf 3060 pto shaft running at 450 rpm (when in 540) and 750

Customer Question

mf 3060 pto shaft running at 450 rpm (when in 540) and 750 rpm (when in 1000) engine speed is at 2000 rpm. is it a wrong gear issue
Submitted: 1 year ago.
Category: Agriculture and Farm Equipment
Expert:  Curtis B. replied 1 year ago.

Are you using a test tach to read the output? Or using numbers off the dash? I don't see this as a gear issue! Is tractor new to you?

Expert:  Curtis B. replied 1 year ago.

There is only only on set of gears made for this.