How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Curtis B. Your Own Question
Curtis B.
Curtis B., Technician
Category: Agriculture and Farm Equipment
Satisfied Customers: 27469
Experience:  Technican turned service manager on multiple lines of equipment and rental equipment.
30244710
Type Your Agriculture and Farm Equipment Question Here...
Curtis B. is online now
A new question is answered every 9 seconds

I have a 310AD and vandals attempted to hotwire by

Customer Question

I have a 310AD and vandals attempted to hotwire by disconnecting wires between starting button on right side of button/key location inside panel. They were chased away but not until the wires were all disconnected. Please direct me on how to reconnect each to proper attachment/other wire. Tom, Houston, TX
Submitted: 1 year ago.
Category: Agriculture and Farm Equipment
Expert:  Curtis B. replied 1 year ago.

Key switch has four terminals. One is marked STA, for starter, this wire goes to the push button. The second wire on the push button goes to starter solenoid.

Expert:  Curtis B. replied 1 year ago.

This wire to the push button has voltage only when key is on.

Expert:  Curtis B. replied 1 year ago.

The Bat terminal on key switch is power from the starter solenoid.

Expert:  Curtis B. replied 1 year ago.

And always has battery voltage.