How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask dd85 Your Own Question
dd85
dd85, Foreman
Category: Agriculture and Farm Equipment
Satisfied Customers: 500
Experience:  Service manger for over 18 years in same Dealership
15057492
Type Your Agriculture and Farm Equipment Question Here...
dd85 is online now
A new question is answered every 9 seconds

Have a old 800 ver and stuck in 2nd gear on the range

Customer Question

have a old 800 ver and stuck in 2nd gear on the range
Submitted: 1 year ago.
Category: Agriculture and Farm Equipment
Expert:  dd85 replied 1 year ago.

Go to the right side of the transmission, that is where the shift linkage goes into the transmission, use lever or hammer and move the linkage to neutral.

When shifting, shift from 1st to neutral let out clutch, then push clutch in shift to 2nd. When shifting to 3rd, push in =clutch move lever just past neutral almost into 1st, then back to neutral, then to tight to 3rd.

If this doesn’t work then you will have to remove the shifting plate and look at the shifting forks.