How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Curtis B. Your Own Question
Curtis B.
Curtis B., Technician
Category: Agriculture and Farm Equipment
Satisfied Customers: 27167
Experience:  Technican turned service manager on multiple lines of equipment and rental equipment.
Type Your Agriculture and Farm Equipment Question Here...
Curtis B. is online now
A new question is answered every 9 seconds

Question concerning JD 2305 FEL Control Lever stuck

Customer Question

Question concerning JD 2305 FEL Control Lever stuck
Submitted: 1 year ago.
Category: Agriculture and Farm Equipment
Customer: replied 1 year ago.
I have JOhn Deere 2305, the FEL Control lever that works the hydraulics is stuck and doesn't seem to move. I have no hydraulic movement for the front. However, the rear hydraulics work. The last time I used the FEL it worked find. I took it off cleaned up tractor and only have mowed last three weeks. Went to put bucket on and got nothing from the control lever.
Customer: replied 1 year ago.
I looked at the linkages and everything that connects and there is no debris or anything that appears to be jamming it.
Customer: replied 1 year ago.
Plus, the filter and hydraulic oil was replaced within 100hrs
Expert:  Curtis B. replied 1 year ago.

Neither boom nor bucket spool moves? This the single joystick for both controls?

Expert:  Curtis B. replied 1 year ago.

If both are stuck, likely the linkage is stuck on the joystick. If one spool moves and the other is stuck, then the lower cover on that spool needs to be removed. Problem will be in the return spring area.

Customer: replied 1 year ago.
ok thanks
Expert:  Curtis B. replied 1 year ago.

Thank you.