How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Curtis B. Your Own Question
Curtis B.
Curtis B., Technician
Category: Agriculture and Farm Equipment
Satisfied Customers: 3109
Experience:  Technican turned service manager on multiple lines of equipment and rental equipment.
30244710
Type Your Agriculture and Farm Equipment Question Here...
Curtis B. is online now
A new question is answered every 9 seconds

Working on mf 1160 s/n450008. pto will not engage,replaced

Customer Question

working on mf 1160 s/n450008. pto will not engage,replaced pto solenoid still no pto
Submitted: 1 year ago.
Category: Agriculture and Farm Equipment
Customer: replied 1 year ago.
Need to know what else would cause pto not to engage and how to fix problem?
Expert:  Curtis B. replied 1 year ago.
Are you getting battery voltage to the solenoid when it should be engaged?
Customer: replied 1 year ago.
Yes we have voltage to the coil. Coil warm to touch still not working..
Customer: replied 1 year ago.
The pto still not engageing
Expert:  Curtis B. replied 1 year ago.
Remove the valve below the solenoid. It is what the solenoid has to move!
Customer: replied 1 year ago.
when we had valve apart solenoid piston was not stuck it had free movement . believe problem down stream of valve as hydraulic pressure controls pto
Expert:  Curtis B. replied 1 year ago.
Down stream is the pto clutch. Do you havepressure to the valve?
Customer: replied 1 year ago.
where can we find pictures of the pto for this 1160 . What is your source of ref.? We don't know enough about this type of tractor . Need to see picture of schematics of hydraulic circuit .
Expert:  Curtis B. replied 1 year ago.
http://www.agcopartsbooks.com/PartsBooksN/Viewer/Default.aspx?